Acid high-performance glass adhesive
JS-1100 acidic high-performance glass adhesive is a single component, acid cured, specially designed for glass bonding assembly in building doors and windows. It relies on moisture in the air to solidify into an excellent and durable high-performance silicone sealant. Has excellent weather resistance. JS-1100 products have superior adhesion to glass.
Product features
1. Easy to use: can be squeezed out for use at any time;
2. Acid curing: It does not require a primer to form a strong bonding force on float glass;
3. It has good construction performance and superior thixotropy.
1. Sag (mm) 0 GB/T 13477.6
2. Surface drying time (h) ≤ 20 GB/T 13477.5 Curing time (humidity 50 ± 5%, temperature 23 ± 2 ℃) 14-21 days
After curing the product at a humidity of 50 ± 5% and a temperature of 23 ± 2 ℃:
3. Elastic recovery rate% ≥ 85 GB/T 13477.17
4. 60% constant elongation adhesion without damage GB/T 13477.10
5. Tensile bonding strength, Mpa ≥ 0.6 GB/T 13477.8
- JS-1100 acidic high-performance glass adhesive is not suitable for structural assembly. It is not easy to use in the following situations:
- 1. All materials that can exude grease, plasticizers, or solvents, as well as certain unvulcanized or partially vulcanized rubbers and tapes;
- 2. Closed areas (silicone sealant needs to be cured with moisture in the air);
- 3. Long term immersion and year-round underground humid environment;
- 4. The paint surface may cause sealing failure due to cracking or peeling of the paint film;
- 5. Frosted or damp surfaces;
- 6. Will come into direct contact with the surface of food;
- 7. Places susceptible to mechanical wear and tear;
- 8. Avoid contact with rubber materials (such as rubber strips, rubber pads, etc.) to avoid yellowing;
- 9. Avoid contact with acidic or alkaline substances (such as exterior wall cleaning solution) to avoid discoloration;
- 10. When the surface temperature of the material is below -5 ℃ or exceeds 40 ℃, construction is not suitable;
- 11. All building materials used in engineering have successfully passed adhesion, compatibility, and contamination tests.
JS-1100 acidic high-performance glass adhesive is only available in one standard color: transparent, and other colors can also be provided according to customer needs. JS-1100 acidic high-performance glass adhesive is provided to customers in plastic tube packaging with a net capacity of 300 milliliters.
當JS-1100酸性高性能玻璃膠以原包裝存在干燥通風、27℃或更低的溫度環(huán)境條件下， JS - 1100產品自生產日期起，貯存期為12個月。